
Kaidan Kaidan
3 months ago

The High Park area, around Toronto's largest park, combines early-1900s detached and semi-detached homes on leafy streets, the homes of High Park North and Swansea, and apartment towers along Bloor Street and High Park Avenue. Mature trees and older housing make sewer and drain work a big part of plumbing here.
POM Plumbing serves High Park homeowners, landlords and building managers with honest diagnosis and written prices.
Many High Park homes still have clay sewer laterals under large trees, cast iron drains and, in some cases, lead or galvanized water services. Basement renovations often reveal undersized drains and weeping tile connected to the sewer. Homes on sloped streets near the park and ravines may face groundwater and drainage issues. Apartment towers need riser, valve and hot water system work.
Large trees around the park invade old clay pipes.
Sewer backups and groundwater on sloped and low-lying streets.
Lead and galvanized lines in pre-1950s homes.
Riser valves and hot water systems in older towers.
High Park homes from the 1910s to the 1940s, many next to the park and its ravines, need specific plumbing care. These are the jobs we do most there.
High Park has many pre-1955 homes with lead water services. We replace the private section and coordinate with the City.
Learn moreLarge trees from the park and along the streets push roots into clay laterals. We cut, camera and reline or replace.
Learn moreHomes on slopes near the park collect runoff. We replace sump pumps, add battery backups and check weeping tile.
Learn moreFinished basements need a backwater valve. We install it with the permit for the City subsidy.
Learn moreCopper installed in renovations 20 to 30 years ago is now developing pinhole leaks. We find and fix them.
Learn moreResidential, condo and commercial plumbing, drain and sewer work for High Park homes and businesses.
Typical ranges before tax. You get an exact written price before any work starts. See the full plumbing price guide.
| Service | Typical cost |
|---|---|
| Drain clog (sink, tub or toilet) | $180 – $350 |
| Main sewer line cleaning | $250 – $650 |
| Sewer camera inspection | $250 – $450 |
| Water heater replacement (tank) | $1,400 – $3,000 |
| Backwater valve installation | $1,800 – $3,500 |
| Sump pump replacement | $800 – $2,000 |
What to check through the year, based on the homes and weather we see in High Park.
Snowmelt runs downhill from the park. Test the sump pump and battery backup.
Check the backwater valve before storm season.
Leaves and roots: clear eavestroughs and book root cutting for the lateral.
Keep heat on in rooms over garages and in rear additions.
High Park homeowners can use the City of Toronto Basement Flooding Protection Subsidy Program. It reimburses 80% of eligible costs, up to $6,650 per property. The work must be done by a City-licensed plumbing contractor, and a backwater valve needs a building permit.
Homes built before the mid-1950s may still have a lead water service. Under the City's Priority Lead Water Service Replacement Program, the City replaces the public section up to the property line. Replacing your private section at the same time removes the lead completely. See lead pipe replacement.
| Eligible work | Maximum subsidy |
|---|---|
| Backwater valve (per valve, up to two) | $1,600 |
| Sump pump and alarm | $2,250 |
| Sump pump battery backup | $300 |
| Home plumbing assessment | $500 |
| Total per property | $6,650 |
80% of eligible costs, up to the limits shown. We handle the permit and inspection, and give you the paperwork you need to apply.
| Problem | Who to call |
|---|---|
| No water on the whole street, or a water main break | City of Toronto: call 311 |
| Water service or sewer pipe between the property line and the main | City of Toronto (public side) |
| Sewer backup that a camera shows is in the City section | City of Toronto: we give you the video for your 311 report |
| Pipes, drains and the sewer lateral from the property line into the house | Homeowner: call a licensed plumber |
| Fixtures, water heater, sump pump, backwater valve | Homeowner: call a licensed plumber |
Not sure which side the problem is on? A sewer camera inspection shows the exact location and depth, so you only pay for work on your section.
High Park's ravines and slopes are beautiful, but they bring water and roots. Homes on lower streets around the park collect runoff in spring and during storms, and the park's large trees send roots into nearby sewer laterals. A working sump pump with a battery backup, a backwater valve, and regular root cutting or relining of the lateral are the main protections. We check all three in one visit.
Many High Park homes were built before the mid-1950s, when lead water services were still used. If yours has one, the City replaces the public section up to the property line through its lead replacement program, and you replace the private section. Doing both at the same time removes the lead completely. We can check your service and coordinate the timing.
We cover every part of High Park. Here is how the area breaks down by neighbourhood and postal code.
| Area | Neighbourhoods | Postal codes |
|---|---|---|
| High Park North | Bloor to Annette, Keele to Parkside | M6P |
| High Park and Swansea edge | South and west of the park | M6S, M6R |
| Bloor West Village and Runnymede | West along Bloor | M6S |
Tell us what is happening and where in High Park you are.
A licensed plumber finds the cause, using a camera where needed.
You approve the price before any work starts.
We fix the problem, test it and leave the area clean.
Licensed plumbers, written prices and a 24/7 emergency line.